This is the smallest indoor
electric helicopter in the world, which is suitable for training
for a full-fledged RC helicopter (H-610).
|
|
REVOLUTOR
H-610P
|
48,800yen(excluding tax) |
|
Features
| |
The extraordinary small and
light body weighing only 100 g enables an indoor flight.
The Rotor control system using optical sensors have realized
a simple mechanism. H-610 is equipped with free and rate
gyroscopes to enable outstanding stability. H-610 has
styrofoam body and rotors for safety.
H-610P provides a stabilized power supply that allows
the REVOLUTOR to be powered directly from a household
outlet. |
|
| The color models
also include a stabilized power supply. |
|
|
|
Set contents
| |
| A
main body completed and adjusted |
1 |
| 4-ch
transmitter |
1 |
| Rotors |
3 pairs of
2 rotors |
| Stabilized
power supply |
1 |
| Driver
|
1 |
| Decal
sticker |
1 |
|
|
Specification
| |
| Number
of bands |
1 |
| Length
of the body |
290mm |
| Height
of the body |
102mm |
| Width
of the body |
48mm |
| Weight
of the body |
100g |
| Main
rotor diameter |
350mm |
| Tail
rotor diameter |
100mm |
| Total
height |
122mm |
| Width
of the skid |
71mm |
| Radio
control range |
10m |
| Flight
time |
About 1 or 3 minute
when using wireless,
and about 30 minutes when using power supply. |
(When the stabilized power supply is used,
the flight time is about thirty minutes.) |
|
Parts List
| |
Body
kit
The body kit has been added to the REVOLUTOR lineup.
The transmitter for the GYROSAUCER and REVOLUTOR can be used.
29,800yen (each color)
Set contents
| |
| Body (completely assembled and adjusted) |
1 |
| Rotor set |
2 pieces/set |
| Driver |
1 |
| Decal sticker |
1 |
| Crystal for transmitter |
1 |
|
|
Nickel-hydrogen battery for wireless flight
| |
-
Enables an extraordinarily prolonged wireless flight of
three minutes
- The long-awaited nickel-hydrogen battery for wireless
flight is now on sale.
- The wireless flight time becomes about three times longer
than that of conventional models.
| Nickel-hydrogen battery |
OP-35461 |
3,500yen |
| Battery charger |
OP-35462 |
6,500yen |
|
Stabilized power supply
| |
The
stabilized power supply, which allows the REVOLUTOR to
be directly powered from a household outlet, is now available.
- The flight performance can be improved dramatically
without being affected by voltage fluctuations.
- Charging is not required.
- A cable 1.5 times longer than the conventional one is
included.
To prevent motor deterioration, flight
time should not exceed approx. 30 minutes, and the REVOLUTOR
body should be rested for the same period after flight.
| Stabilized power supply (single unit) |
8,000yen |
|
|
 |
|
Rotor set
| |
Contents: Main and tail rotors 3 pieces each
Mounting screws and washers
|
Tail rotor set
| |
Contents: Tail rotors 8 pieces/set
|
Replacement body
| |
| H-610 |
OP-95454 |
2,800yen |
Gray-based single color,
skid, rubber, decal, double-faced tape (x1) |
| DESERT (D-desert) |
OP-27332 |
3,800yen |
Beige-based camouflage pattern,
skid, rubber, decal, double-faced tape (x1) |
| FOREST (F-forest) |
OP-27333 |
3,800yen |
Moss green-based camouflage
pattern, skid, rubber, decal, double-faced tape (x1) |
| BLUE SKY (B-sky) |
OP-34795 |
3,800yen |
Blue-based camouflage pattern,
skid, rubber, decal, double-faced tape (x1) |
| CLOUD (C-cloud) |
OP-42345 |
3,800yen |
Gray-based camouflage pattern,
skid, rubber, decal, double-faced tape (x1) |
 |
Main gear unit
| |
Contents: Main gear, mounting screws (x5)
(Sensors are not included in this unit.)
 |
Tail gear unit
| |
Contents: A wire set is included.
 |
Main motor
| |
Contents: High-performance motor, mounting screws (x5)
(Sensors are not included in this unit.)
 |
Tail motor
| |
Contents: High-performance small motor, double-faced
tape, mounting screws (x2)
 |
|
